IP916

Stereo Input Channel Module

The IP916 is an extended version of our IP516 module.
It can be used as effects or groups returns, or for any stereo or mono source.

The
IP916 has 8 stereo channels (for a total of 16 inputs).
Each channel features 8 aux sends, switchable pre /post fader
Each channel can be switched to mono, with balance / pan control.
The post fader and mute signal can be routed to either or both of the master stereo outputs.
Channel Solo (AFL) is available, and is part of the Ark global solo switching.

The
IP916 consists of 2 parts.
- 8 stereo-channel input module
- 8 stereo faders with individual channel mutes

The
IP616 meter module can read inputs and outputs of the IP916 module

IP916 Channel

Bal / Pan
The Bal / Pan pot functions as balance when the input is stereo, or pan when the input is mono.

[Mono]
As standard, each channel is stereo.
When the mono switch is activated, only the left input is used, and gets routed to both Left and Right outputs.

[Mstr 1] and [Mstr 2] switch sends the output to Stereo Master 1 or Stereo Master 2 bus
Both master outputs can be used at the same time.

The IP916 features 8 Aux Sends.
All are stereo pairs, switchable pre/post per pair 1-6.
Aux send 7-8 are always post.

The
[Mtr Post] switch makes the IP616 meter bridge module read the post-fader signal (AFL) instead of the pre-fader input signal.

The
[Safe] switch acts as “Solo Safe” when the Ark is globally switched to SIP mode, effectively making sure that the selected channels will not be muted when other channels are solo-ed.
SIP: (solo-in-place) is a Global Assignable functions. When this is active, solo-ing any channel mutes the other channels - unless they have “solo safe” active - so you’re listening to the channel as it is “in-the-mix” (volume and pan included)

The
[AFL] switch puts the channel in AFL (after fader listen) solo mode.

Like on all Ark modules all switches are illuminated, with the LED intensity being globally controlled.


IP916 Fader


[Mute] switch triggers a relay to mute the stereo signal of the channel

Faders
High-quality 100mm dual / stereo faders.


IP916 Channel and IP916 Fader can be installed in Buc71, Buc72 or Buc73, below the main IP701, IP702 or IP703 master module.
Inputs and output signal of the IP916 are read by the
IP616 meter module.
Direct (stereo, balanced) outputs can be made available, in case you like to use the IP916 to record stems.

This section of our website is about the Ark Console.
Information about our other products can be found starting
at our homepage